Engine temperature control

From: 49,00 €

  • Choice of connectors

    *This key allows you to modify the engine temperature by up to approximately 20°C.
    *For simpler installation

    To simplify assembly, we can insert the terminals into the connectors.

    Does the +5v come on the same side as the arrow on the connector?

    *For simpler installation

    Please note, inserting the terminals into these connectors is quite complicated and fragile, so it is strongly recommended that we send you the harness(es) already connected and ready for assembly.

    Does the +5v come on the same side as the arrow on the connector?

    *For simpler installation

    Please note, inserting the terminals into these connectors is quite complicated and fragile, so it is strongly recommended that we send you the harness(es) already connected and ready for assembly.

    Does the +5v come on the same side as the arrow on the connector?

    *For simpler installation

    Please note, inserting the terminals into these connectors is quite complicated and fragile, so it is strongly recommended that we send you the harness(es) already connected and ready for assembly.

    Does the +5v come on the same side as the arrow on the connector?

    *For simpler installation

    Please note, inserting the terminals into these connectors is quite complicated and fragile, so it is strongly recommended that we send you the harness(es) already connected and ready for assembly.

    Does the +5v come on the same side as the arrow on the connector?

    *For simpler installation

    Please note, inserting the terminals into these connectors is quite complicated and fragile, so it is strongly recommended that we send you the harness(es) already connected and ready for assembly.

    Does the +5v come on the same side as the arrow on the connector?

    *For simpler installation

    Please note, inserting the terminals into these connectors is quite complicated and fragile, so it is strongly recommended that we send you the harness(es) already connected and ready for assembly.

    Does the +5v come on the same side as the arrow on the connector?

    *For simpler installation

    Please note, inserting the terminals into these connectors is quite complicated and fragile, so it is strongly recommended that we send you the harness(es) already connected and ready for assembly.

    Does the +5v come on the same side as the arrow on the connector?

    *For simpler installation

    Please note, inserting the terminals into these connectors is quite complicated and fragile, so it is strongly recommended that we send you the harness(es) already connected and ready for assembly.

    Does the +5v come on the same side as the arrow on the connector?

    Assembly diagram

    Extended Warranty

    + 3 years warranty, i.e. 5 years in total

    Accessories

    OBD scanner

    Instantly check your engine data

    OBD scanner to get all engine information

SKU: dtm Category:

Description

Do you have a Starflex box and your engine starts poorly when cold? This key may be the solution.
Some engines have the reputation of having a poor cold start and the addition of the injection time sent by the Starflex box is insufficient. The temperature sensor will modify the engine temperature information sent to the ECU which will increase its flow to the injectors.
Our key is equipped with a component which will cancel the modification as soon as its temperature reaches between 20° and 25°.
It attaches to the heater hose which goes from the engine outlet to the dashboard.

 

Attention:
Works only on 2 pin temperature probes, check beforehand that there are only 2 wires coming to your temperature probe.
The key will in no case be the solution if your engine has any fault linked to wear (spark plugs, TDC sensor, compressions and others, etc.) and if your ECU has detected one or more engine anomalies.