New bioethanol 2.0 wifi box configured according to your choices

Description

The new generation box for a multitude of possibilities

Bioethanol 2.0 wifi box with choice of male and female connectors.

Unlike searches by vehicle, on this page you have access to all the options (except specific quick assembly harnesses) to allow you to configure your box as you wish.

Content: 

– Bioethanol 2.0 wifi box (1 to 8 cylinders)

– Electrical harness(es) with male and female connectors

– Harness with temperature probe

– Hose clamps

- WIFI password

– PC software (Windows 7, 10, 11) wifi communication

– Smartphone application (Android and IOS) wifi communication

Latest generation case

– Very high precision operation

– A very qualitative and most advanced technological design

PC software (Windows 7.8, 10, 11) and smartphone application (Android and IOS) allow you unprecedented information checks:

– Duty cycle, on each injector

– Injection times sent by your engine computer ECU on each injector

– ECU + housing injection time on each injector

– % additional injection sent by the box on each injector

– Battery/alternator voltage

– Temperature of the housing probe to be attached to your engine

It is also a truly essential tool for any self-respecting technician.

In addition to instantaneous checks, you can easily detect and target an engine malfunction thanks to the colors assigned to each injector on the screen which correspond to the colors of the wires in our harness, so if you detect a problem on the injector (3) green in color, you just need to check where the injector is located which has the green and green/white colored wires of our harness.

Options

– The ethanol sensor for optimal precision and simple adjustment

– Add ECO / SPORT mode with the ethanol sensor to improve the consumption or responsiveness of your engine.

– The injection rail heater and/or temporary modification of the engine temperature sensor to improve cold starts if necessary depending on the engines and your geographical location.

But still:

– Temporary modification of engine temperature sensor data.

– Modification of intake temperature data.

– Modification of the injection rail pressure data.

Housing, harnesses and options guaranteed for 2 years with the possibility of extension up to 5 years.

Before each shipment, all our boxes undergo a series of tests on our bench and on the oscilloscope, to then be pre-adjusted for your motor.

Also benefit from our accessories, spare parts and tools

Would you like to know the countless capabilities of this case? Have a beer, sit down,

Let's go !

Options adapted for the 2.0 case

CONNECTORS

Injector harnesses

Here are the different types of injector connectors we offer.

EV1

TOYOTA

NIPPON-DENSO

EV6

DELPHI

P9

P14

HONDA 1

HONDA 2

HONDA 3

HONDA 4

DENSO

Injector connectors:
DENSO

Order your harness with the connectors adapted to your injectors.
For orders of 5 to 8 cylinders a second identical harness will be sent to you

Number of cylinders: 1 - 4

In stock

Back

EV1

Injector connectors:
EV1

Order your harness with the connectors adapted to your injectors.
For orders of 5 to 8 cylinders a second identical harness will be sent to you

Number of cylinders: 1 - 4

In stock

Back

P9

Injector connectors:
P9

Order your harness with the connectors adapted to your injectors.
For orders of 5 to 8 cylinders a second identical harness will be sent to you

Number of cylinders: 1 - 4

In stock

Back

DELPHI

Injector connectors:
DELPHI

Order your harness with the connectors adapted to your injectors.
For orders of 5 to 8 cylinders a second identical harness will be sent to you

Number of cylinders: 1 - 4

In stock

Back

EV6

Injector connectors:
EV6

Order your harness with the connectors adapted to your injectors.
For orders of 5 to 8 cylinders a second identical harness will be sent to you

Number of cylinders: 1 - 4

In stock

Back

TOYOTA

Injector connectors:
TOYOTA

Order your harness with the connectors adapted to your injectors.
For orders of 5 to 8 cylinders a second identical harness will be sent to you

Number of cylinders: 1 - 4

In stock

Back

HONDA 3

Injector connectors:
HONDA 3

Order your harness with the connectors adapted to your injectors.
For orders of 5 to 8 cylinders a second identical harness will be sent to you

Number of cylinders: 1 - 4

In stock

Back

P14

Injector connectors:
P14

Order your harness with the connectors adapted to your injectors.
For orders of 5 to 8 cylinders a second identical harness will be sent to you

Number of cylinders: 1 - 4

In stock

Back

HONDA 1

Injector connectors:
HONDA

Order your harness with the connectors adapted to your injectors.
For orders of 5 to 8 cylinders a second identical harness will be sent to you

Number of cylinders: 1 - 4

In stock

Back

HONDA 2

Injector connectors:
HONDA 2

Order your harness with the connectors adapted to your injectors.
For orders of 5 to 8 cylinders a second identical harness will be sent to you

Number of cylinders: 1 - 4

In stock

Back

HONDA 4

Injector connectors:
DENSO

Order your harness with the connectors adapted to your injectors.
For orders of 5 to 8 cylinders a second identical harness will be sent to you

Number of cylinders: 1 - 4

In stock

Back

Ethanol sensor with sport mode

Ethanol sensor
+ ECO/NORMAL/SPORT mode

This mode, available only with the ethanol sensor option, allows the injection to be slightly modified depending on the mode chosen:

ECO: the unit will slightly reduce its additional % injection, which will allow you to significantly reduce your consumption while respecting the air/fuel ratio.
NORMAL: The box functions as if this option were not available.
SPORT: During significant acceleration and at a rotation speed greater than 3000 rpm, the unit will increase its additional injection. This injection supplement is adjustable on the PC interface in order not to reach the maximum opening of the injectors (Duty 100%)


This mode only works on indirect injections.

Ethanol sensor with sport mode

Ethanol sensor option

Essential to work with the other options (except OBD scanner), it allows the unit to modify its setting according to the % of ethanol present in the fuel.

We offer it as an option because it is not essential (except for engines without lambda probe and for engines equipped with DPF)

However, it must be admitted that the presence of a sensor makes it possible to obtain better operation, much simpler adjustment and better ease of operation of the engine computer (ECU).

Ethanol sensor with sport mode

Connectors for rail and hoses

Concerning the outlet diameter of your injection rail, we send by default a diameter of 7.89 mm which is common to most injection rails. If the diameter of your ramp is different, please let us know when ordering so that we can send you the desired diameter.

Snowy Fiat 500

Option:
Fuel rail heater

For those who live in very cold places where the temperature drops below -10°C, we have the solution.

You can warm up the injection rail(s) of your engine.

APP

Triggered via smartphone application or PC interface.

The settings are made on the PC interface only:
- The minimum operating voltage
- Maximum operating temperature
- Operating time.

snowy car

The cold is no longer a problem

In operation, the heater will quickly reach 55° to heat the injection rail(s) in order to simplify starting.

Fuel rail heater assembly diagram

Assembly diagram

IAT BEAMS

Option
Changing IAT Air Intake Temperature

When the injectors are inaccessible (for example: certain direct injection engines) it is possible to obtain additional injection if necessary by lowering the air temperature information sent to the computer.
Added to a modification of engine temperature for cold starts and a modification of the high pressure rail (HPS) pressure information, this process can be a solution for good operation on direct injections.
Works on indirect injections too.

The activation code for this option will be sent to you with the order.

List of available beam types

Plan

P9W IAT

PA57 IAT

P164 IAT

P44 IAT

PA3 IAT

EV1 IAT

PA206 IAT

PA34 IAT

ECT P9B

Assembly diagram

IAT harness assembly diagram

If it is a probe with 2 pins, you have a 5v or 12v input on one side (ignition on) and the other side will be the voltage modified by the probe corresponding to the air intake temperature.
If you have a 4 or 5 pin flow meter, in principle the temperature information is located on one of these pins. Refer to the installation page to easily locate it if necessary.

Once the connection is made, you will be able to modify the ideal temperature range via the PC interface with 4 positions depending on the motor temperature as well as a continuous operating position.

Back

P164 IAT

IAT harness with P164 IAT connectors

Harness sent ready for assembly for these 2 connectors.

Check the type of connectors on your air intake temperature sensor.
Choose from the models offered, if we do not have it you can choose the universal model.

Back

EV1 IAT

IAT harness with EV1 connectors

Harness sent ready for assembly for these 2 connectors.

Check the type of connectors on your air intake temperature sensor.
Choose from the models offered, if we do not have it you can choose the universal model.

Back

P9W IAT

IAT harness with P9W IAT connectors

Harness sent ready for assembly for these 2 connectors.

Check the type of connectors on your air intake temperature sensor.
Choose from the models offered, if we do not have it you can choose the universal model.

Back

P44 IAT

IAT harness with P44 connectors

Harness sent ready for assembly for these 2 connectors.

Check the type of connectors on your air intake temperature sensor.
Choose from the models offered, if we do not have it you can choose the universal model.

Back

PA206 IAT

IAT harness with PA206 IAT connectors

Harness sent ready for assembly for these 2 connectors.

Check the type of connectors on your air intake temperature sensor.
Choose from the models offered, if we do not have it you can choose the universal model.

Back

PA57 IAT

IAT harness with PA57 connectors

Harness sent ready for assembly for these 2 connectors.

Check the type of connectors on your air intake temperature sensor.
Choose from the models offered, if we do not have it you can choose the universal model.

Back

PA3 IAT

IAT harness with PA3 IAT connectors

Harness sent ready for assembly for these 2 connectors.

Check the type of connectors on your air intake temperature sensor.
Choose from the models offered, if we do not have it you can choose the universal model.

Back

PA3 IAT

IAT harness with PA34 IAT connectors

Harness sent ready for assembly for these 2 connectors.

Check the type of connectors on your air intake temperature sensor.
Choose from the models offered, if we do not have it you can choose the universal model.

Back

UNIVERSAL IAT

UNIVERSAL model IAT harness

The connection is made directly to the engine harness, you can either make the connection using our sockets or with our terminals and heat-shrinkable sleeves provided.

Check the type of connectors on your air intake temperature sensor.
Choose from the models offered, if we do not have it you can choose the universal model.

Back

IAT BEAMS

Option
Modification of HPS high pressure injection rail pressure

Modifies in % the information from the HP rail pressure sensor (HPS) sent to the electronic computer ECU of your engine.

This process is essentially for direct injections but does not work if your HP pump is not electronically controlled.

The activation code for this option will be sent to you with the order.

List of available beam types

Plan

PA36 HPS

P93 HPS

P143 HPS

PA33 HPS

P43 HPS

UNIVERSAL HPS

Assembly diagram

HPS harness assembly diagram

When the connection to the injectors is impossible or does not work, you have the possibility of acting on the pressure value of the HPS high pressure injection rail.

By sending slightly lower pressure information, the ECU will either increase its HP pump pressure accordingly, allowing it to inject a little more only if necessary since only the lambda probe corrects the injection flow according to needs even if there is an ethanol sensor.
This process is essentially for direct injections but does not work if your HP pump is not electronically controlled.

Once the option has been validated and the connection made, you will have the possibility via the PC interface to modify the voltage sent to the ECU in %

Back

P93 HPS

HPS harness with P93 HPS connectors

Check the type of connectors on your HP rail pressure sensor located on the injection rail.
Choose from the models offered, if we do not have it you can choose the universal model.
The option activation code will be sent to you with the order.

Back

PA33 HPS

HPS harness with PA33 connectors

Check the type of connectors on your HP rail pressure sensor located on the injection rail.
Choose from the models offered, if we do not have it you can choose the universal model.
The option activation code will be sent to you with the order.

Back

PA36 HPS

HPS harness with PA36 HPS connectors

Check the type of connectors on your HP rail pressure sensor located on the injection rail.
Choose from the models offered, if we do not have it you can choose the universal model.
The option activation code will be sent to you with the order.

Back

P143 HPS

HPS harness with P143 connectors

Check the type of connectors on your HP rail pressure sensor located on the injection rail.
Choose from the models offered, if we do not have it you can choose the universal model.
The option activation code will be sent to you with the order.

Back

P43 HPS

HPS harness with P43 HPS connectors

Check the type of connectors on your HP rail pressure sensor located on the injection rail.
Choose from the models offered, if we do not have it you can choose the universal model.
The option activation code will be sent to you with the order.

Back

UNIVERSAL HPS

HPS harness with UNIVERSAL connectors

Check the type of connectors on your HP rail pressure sensor located on the injection rail.
Choose from the models offered, if we do not have it you can choose the universal model.
The option activation code will be sent to you with the order.

Back

OBD scanner

OBD scanner

This small box plugs into the diagnostic socket of your vehicle.
It allows instant transmission of all engine data managed by your engine's electronic computer, as well as checking and clearing engine faults.

Communication via wifi if your smartphone is an iOS (Apple) or via bluetooth if it is an ANDROID (Samsung, and others).

3 year warranty extension

Benefit from a 3-year extended warranty

All our products and accessories are guaranteed for 2 years.
However, the warranty on your order can be extended to 5 years thanks to the 3-year extension that we offer.

Description

gold pcb

Very high quality printed circuit

pcb view

2 ultra-fast and efficient microprocessors

A multitude of components

app and pc

Smartphone application and PC interface

many options

Many options available

ethanol sensor option

Possibility of installing our ethanol sensor so that the box can precisely adjust your injection according to the % of ethanol arriving at the engine.

The activation code for this option is sent to you with your order

eco sport mode option

You can add the ECO/SPORT mode which will allow the unit to adapt its injection according to your needs.

Works only with the ethanol sensor option.
The activation code for this option is sent to you with your order

rail heater option

Possibility of installing 1 or 2 fuel rail heaters depending on the engine type.

The activation code for this option is sent to you with your order

IAT air temperature modification option

Possibility of modifying the air intake temperature values in order to obtain additional enrichment of the computer if necessary. 4 possible modification thresholds.

Works only with the ethanol sensor option.
The activation code for this option is sent to you with your order

HP pressure modification option

Possibility of modifying the values of 2 high pressure ramps in order to obtain additional enrichment of the computer if necessary.

Works only with the ethanol sensor option.
The activation code for this option is sent to you with your order

specific beams

Specific beams So much easier to plug into the socket that connects all the injectors

We are the creators of this method

detailed view of each injector

INEDIT: Lots of information on operation sent to each injector

password lock

No modification possible without password validation in order to protect the installer's work

bench tests

Several bench tests before each shipment

high rotation speeds

Suitable for high rotation speeds

Improved ground lugs

Improved ground lugs
Those who know know that the battery nut does not come off

temp probe fixing

Improved temperature probe attachment
So much simpler to connect to a thermostat screw for example

Suitable for many beams

Suitable for harnesses from many other brands
You have an old case, many brands use these types of 10 pin connectors.
Check, if this is your case, there is no need to dismantle the harness, you can order the box to upgrade to the most advanced range.

Settings and configurations

Login page

Login page

general view

Settings page and validation of options

general settings

general settings

Options to enable

Activation of options

Inserting codes

Enabling options by inserting codes

Cold start

Cold start settings:
- Depending on the temperature
- Operating time
- % enrichment

ECO / SPORT mode

ECO / NORMAL / SPORT mode settings
- Choice of mode
- % additional

Rail heater

Fuel rail heater settings
- Operating time
- Maximum temperature
- Minimum voltage

Changing hp ramp values

Modification of HP ramp values
- In %
- Stops working if ethanol < 30%

Changing air temp 1 values

Changing air intake temperature values 1
- Depending on the temperature
- 5 variation positions
- Possibility to modify without time limit
- Stops working if ethanol < 30%

Changing air temp 2 values

Changing the air intake temperature values 2 for 2 minutes
- Depending on the temperature
- 5 variation positions
- Possibility to modify without time limit
- Stops working if ethanol < 30%

Validation of settings

No modification or activation will be saved if it is not validated by password in the end

Display of parameters on PC interface

display of parameters on PC interface

Display of parameters on PC interface

Display of general parameters

general settings
- Engine speed
- Housing probe temperature
- Battery voltage

Ethanol sensor display

Ethanol sensor display
- Operating status of the ethanol sensor
- % of ethanol measured
- Fuel temperature

Injector operation view

Detailed view of the operation sent to each injector
- ECU injection time
- Injection time ECU + Housing
- Duty cycle
- % injection added by the housing

Display of C1 and C2 values

Displaying data from pressure sensor 1 and 2
- Operating state
- % modification
- Value received
- Issued value
Works only if ethanol > 30%

Display of T1 and T3 values

Display of T1 and T3 temperature sensor data
- Operating state
- Current correction position
Works only if ethanol > 30%

Hot wire start

Starting the rail heater
- “Ignore” conditions button
- Battery voltage
- Probe temperature
- triggering

Display of parameters on smartphone application

WIFI CONNECTION APP

WIFI connection

Connection

Settings:
- Choice of language: French or English

Page 1

- % of ethanol measured
- Fuel temperature
- Housing probe temperature
- Battery voltage
- Engine speed
- Cold start status
- State of Sport mode during acceleration

Page 2 duties

Detailed view of the operation of each injector
- Duty cycle (% injector opening)

Page 2 %2.0

Detailed view of the operation of each injector
- % injection added by the housing

Page 2 ECU

Detailed view of the operation of each injector
- Injection times sent by the ECU

Page 2 ECU + Box

Detailed view of the operation of each injector
- Total injection time, ECU + Housing

Page 3 T1 T2 T3

- Status of positions of modifications of:
- Air intake temperature sensor T1
- T3 air intake temperature sensor
Works only if ethanol > 30%

Page 3 C1 and C2 values app

Display of data from pressure sensors 1 and 2
- Operating state
- % modification
- Value received
- Issued value
Works only if ethanol > 30%

Page 4

Display and triggering of the rail heater
- Ignore the conditions for a forced march
- Battery voltage
- Housing probe temperature
- Triggering
- Operating state

ECO / NORMAL / SPORT mode: display of the current mode

For installers

Remote checks and diagnostics

With our app and OBD scanner you can check or diagnose remotely with the customer

With all its options, adjustment possibilities, operational checks, and wifi communication, the new PARADIGME85 2.0 ethanol kit is the latest generation ethanol box and becomes the most advanced bio ethanol kit.
More than an E85 box, it is also an injection tool

Password validation

Without password
No modification possible

We protect your settings

A customer who has a malfunction of any kind will always want to first modify the settings of the ethanol unit even though the problem is quite different.
Without a password he will not be able to modify anything.

very thorough verification of operation

Detailed view of all cylinders

The multiple operational checks on each cylinder will often allow you to target the problem before even opening the hood

Conversion to bio ethanol of your gasoline engine.
You will have a superethanol car.
Latest generation ethanol box.

Cylinder colors

The colors assigned to the injectors on the application are identical to the colors of the wires of our injector harness

Too simple to target the injector concerned

Latest generation prestige bio ethanol kit, it was designed by professionals for professionals

Check and adjust hood closed

A verification ? An adjustment? No need to open the hood

The best bio ethanol kit is undoubtedly the E85 PARADIGME85 2.0 box which can be found on www.boitier-e85.com

ParadigmE85 app and Car Play

BIKER PARADIGM85

WOMAN THUMBS UP

Mechanic remote adjustment and app

APPLI AND TORQUE

ETHANOL CAR SNOW

ETHANOL CAR SNOW

BOAT OPERATING ON BIOETHANOL

PC AND APP

JET SKI

BUGGY

QUAD

[peekaboo_link name=”mots_cles”] i [/peekaboo_link]

[peekaboo_content name=”mots_cles”] Ethanol box, Ethanol sensor, Ethanol box 2.0 wifi, E85 sensor, Ethanol probe, Ethanol box E85 2.0 wifi, E85 probe, Bioethanol box, Bioethanol sensor, Bioethanol box 2.0 wifi, Ethanol sensor, Ethanol sensor , Bio ethanol box, Bio ethanol 2.0 wifi box, Ethanol sensor, Flex fuel box, ethanol sensor, Ethanol sensor, Flexfuel box, E85 box, Superethanol box, Superethanol box, Ethanol box, Ethanol box, E85 kit, E85 ethanol kit, Kit ethanol 2.0 wifi, Ethanol kit, Flexfuel kit, Flex fuel kit, Bioethanol kit, Bioethanol 2.0 wifi kit, Bio ethanol 2.0 wifi kit, Bio ethanol kit, Superethanol kit, Superethanol kit, Ethanol kit, Ethanol kit, E85 converter, E85 ethanol converter , Ethanol converter, Ethanol converter, Flexfuel converter, Flex fuel converter, Bioethanol converter, Bioethanol 2.0 wifi converter, Bio ethanol converter, Bio ethanol converter, Superethanol converter, Superethanol converter, Ethanol converter, Ethanol converter [/peekaboo_content]