Description
The 2.0 Wifi box offers you the possibility of reducing the HP pressure information sent to the ECU, so the ECU will therefore fill this gap by increasing the pressure on the HP pump, which allows for a higher pressure. in the ramp and to obtain an additional injection correction margin for the E85, however on many ECUs the available margin is low, it will therefore be necessary to find the right setting so that the ECU does not detect a fault.
Only direct injection engines are equipped with HP rail pressure sensor(s).
This option is valid in the case where the ECU detects the presence of the box when it is connected to the injectors. In most cases the box works very well when connected only to the injectors, even for direct injections.
Possibility of adjustment: from 0 to -25%
Possibility of modifying 2 pressure sensors provided that options C1 and C2 are activated.
The setting is only made on the PC application.
Verification of operation and parameters is done on the PC and Smartphone application.
Important: having not been able to test this operation on all existing direct injection engines, we are therefore unable to assure you that this type of modification is suitable for your engine.