Description
Starflex ethanol housing
E85 Starflex bioethanol box accompanied by the harness and male and female connectors corresponding to your injectors.
Shipped ready to plug in and the box pre-tuned for your motor.
Content:
– Bioethanol box
– Injector harness with 4 male connectors and 4 female connectors
– Hose clamps
Also take advantage of our accessories, spare parts and tools…
Housing, harnesses and options guaranteed for 2 years with the possibility of extension up to 5 years.
Before each shipment, all our boxes undergo a series of tests on our bench and on the oscilloscope, to then be pre-adjusted for your motor.
Functioning
[peekaboo_link name=”starflex_specific_description”] Explanations on how it works: Click here [/peekaboo_link][peekaboo_content name=”description_specifique_starflex”]
Your car's electronic computer has the possibility of reducing or increasing the injection times sent to the injectors but with a maximum and minimum tolerance which is suitable for operation with super unleaded fuel.
The problem is that if we put ethanol without a box, the lambda probe will indicate to the electronic computer that the air/fuel mixture coming out of the exhaust is too lean, the computer will increase its injection times but it will reach quickly reaches its maximum tolerance and will end up going into degraded mode and turning on the “failure fault” light on the dashboard because of a mixture that is too lean.
Our ethanol unit will provide additional injection time to the injectors which will allow your engine's electronic computer to correctly correct its injection without ever reaching its maximum tolerance for which it was programmed, this will allow it to operate as usual .
And vice versa if we put back super unleaded, for example by increasing the injection time of 15% via the ethanol unit and the lambda probe will indicate to the computer a rich mixture and the latter will reduce its injection times by 15% by compared to its usual lead-free operation without reaching its minimum tolerance and will therefore be able to compensate for the enrichment of the ethanol box in order to provide an optimal mixture (ratio). In this way, your engine will operate optimally, regardless of the ethanol and/or unleaded mixture present in the tank.
Info: It is your exhaust regulator probe (lambda probe) which regulates the carburetion thanks to an oscillation which allows the engine computer to know if what comes out of the exhaust is too rich or lean and will correct its timings. injection accordingly.
Cold start: a temperature probe is integrated into the box, and depending on a set of parameters (external temperature, last start, last operating time, etc.) the box will modify the starter accordingly.[/peekaboo_content]
The advantages of the Starflex case
First of all, this box has proven itself for more than 10 years and we have recently improved the electronic components and modified the printed circuit.
Very good starting in winter temperatures thanks to its integrated temperature sensor, and for certain engines which experience cold starting problems you have the possibility of installing a temperature key (optional) so that the computer receives a clearly defined temperature. lower at temperatures below 20°C then restores the correct information beyond this temperature. Different models of connectors are offered to you and a universal version if none corresponds to your model.
Easy to install
Harness electrical wires protected to connectors
Printed circuit protected from shock and humidity thanks to an insulating resin
No illuminated fault light on the dashboard
Optimal operation up to 10,500 rpm
Interchangeable harness
It is no longer necessary to use lead-free Super, even during low temperatures in winter.
Once installed, you can directly fill up with E85 without going through several steps (25% the first fill, then 50% the second, etc.)
Sent preset for your engine
Accessories and options offered for the Starflex ethanol box
Engine temperature key
Some engines have the reputation of starting very poorly on E85 despite the additional injection provided by the box.
Thanks to this option, you can act on the engine temperature information sent to the ECU computer.
Choose this option only if you have a big cold start difference between E85 biofuel and gasoline
Check the type of connectors on your engine temperature sensor.
Choose from the models offered, if we do not have it you can choose the universal model.
List of available beam types
We will act on the temperature information voltage sent to the electronic computer ECU of your engine.
Harness composed of a resistor and an electronic component triggering the modification at temperatures below 20°C.
Attaches to the heating hose at the calorstat outlet.
Connects between the ECT engine temperature sensor and the connector of this sensor.
We will act on the temperature information voltage sent to the electronic computer ECU of your engine.
Harness composed of a resistor and an electronic component triggering the modification at temperatures below 20°C.
Check the type of connectors on your engine temperature sensor.
Choose from the models offered, if we do not have it you can choose the universal model.
We will act on the temperature information voltage sent to the electronic computer ECU of your engine.
Harness composed of a resistor and an electronic component triggering the modification at temperatures below 20°C.
Check the type of connectors on your engine temperature sensor.
Choose from the models offered, if we do not have it you can choose the universal model.
We will act on the temperature information voltage sent to the electronic computer ECU of your engine.
Harness composed of a resistor and an electronic component triggering the modification at temperatures below 20°C.
Check the type of connectors on your engine temperature sensor.
Choose from the models offered, if we do not have it you can choose the universal model.
We will act on the temperature information voltage sent to the electronic computer ECU of your engine.
Harness composed of a resistor and an electronic component triggering the modification at temperatures below 20°C.
Check the type of connectors on your engine temperature sensor.
Choose from the models offered, if we do not have it you can choose the universal model.
We will act on the temperature information voltage sent to the electronic computer ECU of your engine.
Harness composed of a resistor and an electronic component triggering the modification at temperatures below 20°C.
Check the type of connectors on your engine temperature sensor.
Choose from the models offered, if we do not have it you can choose the universal model.
We will act on the temperature information voltage sent to the electronic computer ECU of your engine.
Harness composed of a resistor and an electronic component triggering the modification at temperatures below 20°C.
Check the type of connectors on your engine temperature sensor.
Choose from the models offered, if we do not have it you can choose the universal model.
We will act on the temperature information voltage sent to the electronic computer ECU of your engine.
Harness composed of a resistor and an electronic component triggering the modification at temperatures below 20°C.
Check the type of connectors on your engine temperature sensor.
Choose from the models offered, if we do not have it you can choose the universal model.
We will act on the temperature information voltage sent to the electronic computer ECU of your engine.
Harness composed of a resistor and an electronic component triggering the modification at temperatures below 20°C.
Check the type of connectors on your engine temperature sensor.
Choose from the models offered, if we do not have it you can choose the universal model.
We will act on the temperature information voltage sent to the electronic computer ECU of your engine.
Harness composed of a resistor and an electronic component triggering the modification at temperatures below 20°C.
Please note, this temperature key only works with 2-wire temperature probes. Models with 3 and 4 wires are not compatible with this universal DTP.
We will act on the temperature information voltage sent to the electronic computer ECU of your engine.
Harness composed of a resistor and an electronic component triggering the modification at temperatures below 20°C.
Check the type of connectors on your engine temperature sensor.
Choose from the models offered, if we do not have it you can choose the universal model.
This small box plugs into the diagnostic socket of your vehicle.
It allows instant transmission of all engine data managed by your engine's electronic computer, as well as checking and clearing engine faults.
Communication via wifi if your smartphone is an iOS (Apple) or via bluetooth if it is an ANDROID (Samsung, and others).
Socket that plugs into the injector harness instead of the housing
All our products and accessories are guaranteed for 2 years.
However, the warranty on your order can be extended to 5 years thanks to the 3-year extension that we offer.
[peekaboo_link name=”mots_cles”] i [/peekaboo_link]
[peekaboo_content name=”mots_cles”] Ethanol box, Ethanol sensor, E85 sensor, Ethanol probe, E85 probe, Bioethanol box, Bioethanol sensor, Bioethanol box, E85 kit, Ethanol kit, Flexfuel kit, Flex fuel kit, Bioethanol kit Bio ethanol kit , Superethanol kit, E85 converter, Ethanol converter, Ethanol conversion, superethanol conversion box, box for running on E85[/peekaboo_content]
