Description
Starflex ethanol conversion kit
Starflex E85 bioethanol kit accompanied by the wiring harness and male and female connectors corresponding to your injectors.
Sent ready to be plugged in and the box is preset for your motor.
Content:
– Bioethanol casing
– Injector harness with 4 male connectors and 4 female connectors
– Hose clamps
Take advantage of our accessories, spare parts and tools as well…
Housing, wiring harnesses and options are guaranteed for 2 years with the possibility of extension up to 5 years..
Before each shipment, all our boxes undergo a series of tests on our bench and with the oscilloscope, and are then preset for your motor.
Functioning
[peekaboo_link name=”starflex_specific_description”] Explanation of how it works: here [/peekaboo_link][peekaboo_content name=”description_specifique_starflex”]
Your car's electronic control unit has the ability to decrease or increase the injection times sent to the injectors, but with a maximum and minimum tolerance that is suitable for operation with super unleaded fuel.
The problem is that if you use ethanol without a conversion kit, the lambda sensor will tell the electronic computer that the air/fuel mixture coming out of the exhaust is too lean, the computer will increase its injection times but it will quickly reach its maximum tolerance and will eventually go into limp mode and light up the "fault" warning light on the dashboard because of a mixture that is too lean.
Our ethanol conversion kit will provide additional injection time to the injectors, which will allow your engine's electronic control unit to correctly correct its injection without ever reaching its maximum tolerance for which it was programmed, allowing it to function as usual.
Conversely, if you switch to premium unleaded fuel, increasing the injection time by 15% using an ethanol conversion kit, the lambda sensor will indicate a rich mixture to the engine control unit (ECU). The ECU will then reduce its injection times by 15% compared to its usual operation with unleaded fuel, without reaching its minimum tolerance. This allows it to compensate for the enrichment introduced by the ethanol conversion kit to provide an optimal mixture (ratio). In this way, your engine will run optimally, regardless of the ethanol and/or unleaded fuel mixture in the tank.
Info: It is your exhaust regulating probe (lambda probe) that regulates the fuel mixture through an oscillation which allows the engine computer to know if what comes out of the exhaust is too rich or lean and will correct its injection times accordingly.
Cold start: a temperature sensor is integrated into the housing, and depending on a set of parameters (outside temperature, last start, last operating time, etc.) the housing will modify the starter accordingly.
The advantages of the Starflex case
Firstly, this case has proven itself for over 10 years and we have recently improved the electronic components and modified the printed circuit board.
Excellent starting performance in winter temperatures thanks to its integrated temperature sensor. For some engines that experience cold start problems, you can install an optional temperature sensor that allows the engine control unit (ECU) to receive a significantly lower temperature reading below 20°C and then correct the reading above that temperature. Various connector models are available, including a universal version if none of them fit your vehicle.
Easy to install
The electrical wires in the harness are protected up to the connectors.
Printed circuit board protected from shocks and moisture thanks to an insulating resin
No fault indicator light illuminated on the dashboard
Optimal operation up to 10500 rpm
Interchangeable wiring harness
It is no longer necessary to use Super unleaded, even during low temperatures in winter.
Once installed, you can directly fill up with E85 without going through several steps (25% on the first fill-up, then 50% on the second, etc.)
Sent pre-set for your engine
Accessories and options offered for the Starflex ethanol conversion kit
Engine temperature misalignment
Some engines have a reputation for starting very poorly on E85 despite the additional injection provided by the control unit.
With this option, you can influence the engine temperature information sent to the ECU.
Choose this option only if you experience a significant difference in cold-start performance between E85 biofuel and gasoline.
Check the type of connectors on your engine temperature sensor.
Choose from the models offered; if we do not have it, you can choose the universal model.
List of available beam types
This small device plugs into your vehicle's diagnostic port.
It allows you to instantly transmit all engine data managed by your engine's electronic control unit, as well as to check and clear engine faults.
Communication via Wi-Fi if your smartphone is an iOS (Apple) or via Bluetooth if it is an Android (Samsung, and others).
Plug that connects to the injector wiring harness in place of the control box
All our products and accessories come with a 2-year warranty.
However, the warranty for your order can be extended to 5 years thanks to the 3-year extension we offer.
[peekaboo_link name=”mots_cles”] i [/peekaboo_link]
[peekaboo_content name=”keywords”] Ethanol conversion kit, Ethanol sensor, E85 sensor, Ethanol probe, E85 probe, Bioethanol conversion kit, Bioethanol sensor, Bioethanol conversion kit, E85 kit, Ethanol kit, Flexfuel kit, Flexfuel kit, Bioethanol kit, Bioethanol kit, Superethanol kit, E85 converter, Ethanol converter, Ethanol conversion, Superethanol conversion kit, E85 conversion kit[/peekaboo_content]
